Products

Sheet Metal Machinery for Bending, Shearing, Rolling and Grooving

Browse sheet metal machinery and equipment by process: press brakes, shears, rollers, V-grooving, laser welding and robotic cells. Compare models and applicable conditions on each product page.

Sheet Metal Machinery for Bending, Shearing, Rolling and Grooving

Overview

Find the sheet metal machinery for your part

This directory links the equipment information published on this site; it is not a complete statement of the manufacturer’s supply range. Start with the operation your part needs. The finder above suggests starting points from part type, production pattern and appearance needs; it does not approve or rule out a machine model.

Read more

Shops describe this category in different ways — sheet metal fabrication equipment, sheet metal working machinery or metal fabrication machinery. The equipment map below is organised by the operation your part needs, so the name of the category does not change the starting point.

Equipment overview

Compare sheet metal fabrication equipment by the operation your part needs, then review the model and conditions on the product page.

Range

Equipment by category

Compare HG, NG, MG and HM press brakes

Compare HG, NG, MG and HM press brakes

Explore HG/HM electro-hydraulic, NG all-electric and MG up-acting press brakes. Compare model parameters, dimensions, working range and tooling requirements.

Read more

Explore HG/HM electro-hydraulic, NG all-electric and MG up-acting press brakes. Compare model parameters, dimensions, working range and tooling requirements.

Panel Bender: AG/AGP CNC Panel Bending Machine

Panel Bender: AG/AGP CNC Panel Bending Machine

AG and AGP panel benders — CNC panel bending machines — form thin sheet panels for doors, cabinets and boxes. AG models use suction-cup clamping and AGP models a press arm; choose by part size and flange structure.

Read more

A panel bender — also called a panel bending machine, automatic panel bender or sheet metal panel bender — forms thin-sheet doors, cabinets and boxes. Check whether the proposed machine can grip the blank, present each edge, reposition and remove the finished part before comparing routes.

Guillotine Shearing Machine for Sheet Metal Cutting

Guillotine Shearing Machine for Sheet Metal Cutting

The guillotine shearing machine — a sheet metal shear — makes straight cuts in flat sheets and strips. Choose it by material, actual thickness and cut length, then confirm blade clearance and sheet support.

Read more

A guillotine shearing machine — also called a guillotine shear, sheet metal shear or hydraulic shearing machine — cuts straight blanks and strips. Match material, actual thickness and cut length, then confirm positioning, support and the required cut edge.

Plate Rolling Machine: 4-Roll Plate Bending and Rolling

Plate Rolling Machine: 4-Roll Plate Bending and Rolling

The four-roll plate rolling machine — a plate bending machine — forms cylindrical shells. Select it by material, actual thickness, working width and finished diameter; check pre-bending and cone work separately.

Read more

A plate rolling machine — also called a plate bending machine, sheet metal rolling machine, slip roll machine or plate roller — forms cylindrical shells. Match material, actual thickness, working width and unloaded finished diameter; confirm pre-bending separately.

Robotic Press Brake Cell

Robotic Press Brake Cell

Our robotic bending cell combines a press brake, industrial robot and gripper to handle parts through the bending sequence. The cell layout brings loading, bending, regripping and unloading together around the part.

Read more

Our robotic press brake cell combines a press brake, an industrial robot and a gripper matched to the part. We configure handling, regripping and unloading around the complete bending sequence.

Laser Welding Machine: Handheld Fiber Laser Welder

Laser Welding Machine: Handheld Fiber Laser Welder

The handheld fiber laser welding machine — a laser welding machine used as a manual laser welder — suits flexible welding stations. Match the source, head, wire feed and cooling to your material, joint access and weld result.

Read more

A handheld laser welding machine is a fiber laser welding machine used as a manual laser welder; also called a handheld laser welder, it is moved along the joint. Compare packages around your material, joint access and required weld result, and agree the source, head, wire feed, gas and cooling configuration in the quotation.

Arc Welding Robot: 6-Axis and 7-Axis Welding Robot

Arc Welding Robot: 6-Axis and 7-Axis Welding Robot

An arc welding robot — a welding robot for repeat arc welds — automates the torch path. Choose the arm by joint access and tool-side load, then agree the torch, welding package and cell layout.

Read more

An arc welding robot — also called a welding robot, robotic welding machine or industrial welding robot — suits repeated joint families when parts locate consistently and the torch can reach the welds. A MIG welding robot package still needs the joint, fixture and welding procedure checked before selecting an arm.

Product range

NVA CNC V-Grooving Machine

Our NVA CNC V-grooving machine cuts V-shaped grooves along the bend line before forming. The series covers processing lengths from 1600 to 6200 mm for visible sheet metal parts.

Read more

Our NVA CNC V grooving machine cuts a V-shaped groove along the bend line before folding. The series covers 0.5–6 mm sheet thickness, 1600–6200 mm processing length and 10–1600 mm processing width.

Find a starting point for your part

Preliminary discussion directions, not a machine selection. Drawings, material and process checks are needed to confirm suitability.

Options to discuss

Bring this brief to Contact

Selection

From category to an enquiry

Read more
  • Identify the operations on a representative drawing and open the relevant equipment page above.
  • Review the published model information and list the material, geometry, tooling and configuration conditions still to confirm.
  • Send the drawing and those open questions for an equipment discussion; unknown values need not prevent an initial enquiry.

For a detailed press brake selection sequence, use the press brake selection guide.

Estimates to prepare an enquiry

Press brake tonnage and V-die estimates can help prepare bending questions. They are theoretical checks, not approval of a machine, tool or part. Do not use unknown inputs or an estimate alone to eliminate a model; completing calculators is not a condition for sending an enquiry.

Read more

Metal weight calculator can help estimate blank or shell weight for handling discussions. The result does not establish the capacity of handling equipment or replace checking the actual part.

Operation

Sheet metal machines by operation

Read more
Part or operationProduct page to reviewItems to confirm
Angles and flangesPress brakesPart geometry, force and bend length, tooling and clearance
Multi-edge sheet panelsPanel bendersCurrent model, material and bend length; grip, edge access and finished-part removal
Repeated bending and handlingRobotic bending cellsGripping, changeover, interfaces and the complete production cycle
Straight blanks and stripsShearing machinesMaterial, actual thickness, cutting length and edge requirements
Cylinders and curved panelsPlate rolling machinesMaterial, working width, actual thickness, finished diameter and end pre-bending
Grooves before bendingV-grooving machinesGroove layout, remaining section and the subsequent bend
Handheld laser weldingLaser welding machinesMaterial, joint access, required weld result and the quoted package
Repeated arc-welded jointsWelding robotsPart locating, torch access, fixtures and the welding package

MG, NG, HG and HM press brake information

MG describes a rising lower table against a fixed upper beam; NG describes a servo-driven ram without a hydraulic bending circuit. Motion and drive are different dimensions. The model tables support initial comparison; the actual part, tooling and clearance still need checking. HG and HM are electro-hydraulic series in which the upper beam moves.

Read more
SeriesRam and tableItems to confirm
MG up-actingThe lower table rises against a fixed upper beam.Check loading, part support, tooling clearance and the listed force and length for the proposed model.
NG electricA servo-driven ram in place of a hydraulic circuit.Check part geometry, tooling clearance, electrical supply and the proposed production sequence. The drive name alone does not establish cycle time or energy per part.
HG electro-hydraulicThe upper beam moves under electro-hydraulic drive.Check tooling load, daylight and the site electrical supply for the proposed model; 31 models from 35 to 400 ton.
HM electro-hydraulicThe upper beam moves under electro-hydraulic drive.Check the same single model row for force, length and clearance; 28 models from 80 to 320 ton.

Technology

Place the operation in the sheet metal fabrication route

Straight shearing prepares edges and blanks; holes and contours require a separate cutting process. Plate rolling forms cylinders or curved panels. Welding joins parts, so access and the order of forming and joining must be reviewed on the drawing. Bending automation includes gripping and handling around the bend, rather than just repeating a machine stroke.

Read more

Review process notes

For industry-specific work, continue with HVAC sheet metal fabrication, elevator sheet metal or electrical cabinet fabrication.

Resources

What to send with an equipment enquiry

A quotation is built from the part, so the enquiry should carry the inputs below. These are the questions we ask first, not a list of promises.

Read more
  • The part family, with a drawing or a clear description of each representative part.
  • Material and grade, because force and springback change with the grade.
  • Sheet thickness, the longest bend or cut, the tightest radius and the required angle or dimension.
  • The batch pattern: how many parts, how often the job returns and how many changeovers sit in a week.
  • The tooling already owned, the floor space and the power supply available, and the operation that feeds and follows the machine.
  • The target cycle, so the machine is matched to the shop rather than to a catalogue.

For a project in Brazil, use the Brazil project guide to prepare part details and delivery questions before requesting a quotation.

Common questions

What types of sheet metal machinery do you supply?

The published range covers press brakes, panel benders, robotic bending cells, shearing machines, plate rolling machines, V-grooving machines, laser welding machines and welding robots. Each product page states the model information and the conditions that still need confirmation.

How do I choose sheet metal machinery for my parts?

Start with the operations on a representative drawing: bending, shearing, rolling, grooving or welding. Then check the material, thickness, longest dimension and batch pattern against the model information on the relevant page. The finder and tables are starting points, not an approval of a model.

How is sheet metal machinery priced?

Price follows the model, working length, tooling, control and configuration, so it is confirmed against a quotation rather than a catalogue figure. Send the part drawing, material, thickness and batch pattern to define the configuration.

Can you supply a complete sheet metal fabrication line?

The site publishes the machine classes shown above, not a turnkey line. Feeding, handling, joining and finishing equipment must be reviewed as separate operations for the part route.

Documents, sources and next steps

Product catalogue

RAGOS product catalogue (English PDF)

Press brakes, panel benders, V-grooving machines and robotic bending cells: 6 series and 80 models with standard specifications and the configuration choices behind a machine order.

English PDF · 28 pages · 80 models · 6 series · 1.64 MB · November 2026

Download the English PDF (1.64 MB)

Equipment and quotations

Contact JS Ragos for machine models, configurations and quotations.

Get a quote

Inquiry form

Tell us which equipment you need or what you would like to know. You can include a model if you have one in mind.

This form does not autosave unsent drafts. Keep this tab open while checking the source or privacy notice.

Contact details (optional)
Machine, process and drawing details (optional)

PDF, DWG, DXF, STEP, JPG or PNG, up to 10 MB.

We use these details only to respond to your inquiry. Privacy policy (opens in a new tab)