Resources
Sheet metal charts and downloads
Start with the English product catalogue, or choose a static calculation reference, a blank acceptance or procurement worksheet, or a standards index snapshot.
Product catalogue
RAGOS product catalogue (English PDF)
Press brakes, panel benders, V-grooving machines and robotic bending cells: 6 series and 80 models with standard specifications and the configuration choices behind a machine order.
English PDF · 28 pages · 80 models · 6 series · 1.64 MB · November 2026
The seven reference files below are English PDFs: four calculation reference sheets, one standards index snapshot and two blank worksheets for precision acceptance and standards-procurement review. The product catalogue is a separate English PDF listed above. Choose by the question and fixed inputs below. The standards index and blank worksheets do not establish compliance or acceptance.
The files
Press brake tonnage chart (PDF)
Theoretical air-bending force for a 1 m bend in mild steel at 450 MPa; thickness 1–6 mm and V/t = 6/8/10/12. Metric tonnes-force, kN and US short tons-force are distinct units. Recalculate for other lengths, strengths or openings; this is not machine approval. English PDF · 3 pages · PDF printed Checked date: 2026-11-02. V/t is the V-die opening width divided by sheet thickness.Bend deduction chart (PDF)
Theoretical single-bend allowance (BA), outside setback (OSSB), deduction (BD) and flat length with K = 0.44 and two 100 mm outside legs measured to the virtual sharp corner. Rotation angles 90°/120°/135° are not included angles. This is not a measured universal deduction table. English PDF · 4 pages · PDF printed Checked date: 2026-11-04.V-die opening chart (PDF)
Opening starting points, estimated inside radius and minimum flange for mild steel, stainless steel and aluminium at thicknesses 0.5–8 mm. Stainless steel includes both 10t and 12t. The 0.5V+t flange rule is an empirical screening estimate, not a guarantee. English PDF · 2 pages · PDF printed Checked date: 2026-11-02.Sheet metal gauge and weight chart (PDF)
US Standard Gauge for carbon sheet steel, gauges 3–30, density 7.85 g/cm³. Not Manufacturers Standard Gauge (MSG); do not convert stainless-steel or aluminium gauge numbers with it. Single-sheet calculated mass uses 1000×2000 mm; for other sizes multiply kg/m² by actual area. Calculated mass is not a weighing record or the legal table’s mass column. English PDF · 4 pages · PDF printed Checked date: 2026-11-03.Standards quick reference (PDF)
Index of 20 standards: identity, status, dates, scope, lawful text access and five EU-list citation notes; not official text, clauses or certification. Static register snapshot checked 2026-11-04; recheck later changes against the online register and official catalogues. English PDF · 4 pages · PDF printed Checked date: 2026-11-04.Press brake precision acceptance worksheet (PDF)
Separate blank worksheets for GB/T 33644-2025, GB/T 14349-2011 and upcoming GB/T 14349-2026. Raw readings, signed deviations, untested/deferred/N/A states, correction and retest are recorded without an automatic pass. Numerical limits stay blank pending clause/page and second-person review. English PDF · 7 pages · Checked 2026-11-04.
Check quotations and supplier evidence
| Conditions to revisit | Online check |
|---|---|
| Change bend length, strength or V opening | Recalculate bending force |
| Change angle, radius, K or leg dimensions. The online static table covers only 90°/2 mm; use live inputs to recalculate other angles. | Recalculate allowance and deduction |
| Change material or thickness. See the live result for flange length; the static table has no flange column. | Check V-die starting points |
| Change sheet size, density or quantity | Calculate metal weight |
| Confirm the current edition, select candidate standards by machine/date/market, or check quotation citations locally | Select versions and check citations |
How to use a chart with a drawing
Match the actual material, measured thickness and tooling to the drawing. Mild-steel tables do not transfer directly to stainless or high-strength steel; changing the V opening changes the inside radius and minimum flange. Printed values can support quotation preparation. Recalculation updates only a theoretical result: material, machine load envelope, tooling capacity and trial-bend confirmation still need separate checks.
Where the numbers come from
The PDFs are for offline reference and do not update automatically. Before use, check the stated scope, edition and Checked date against current online information or official sources. Checked is the information review date, not the file creation or download date.
Check a downloaded chart before using it
| Check | Next action |
|---|---|
| Units and assumptions | Match material, actual thickness, angle convention, radius and tooling to the chart; if they differ, return to the calculator or method page |
| Capacity | Check estimated force for the actual loaded length against both the machine load envelope and tooling rated load. A 1 m value is not whole-machine capacity or load approval. |
| Revision | Keep the file name, PDF printed Checked date, download date and saved copy with the job. The same URL does not prove an unchanged revision; recheck standards against the current register and official catalogues. |
| Validation | Keep estimates separate from measured trial results and the signed acceptance record |
These PDFs are reference sheets, not material certificates, machine inspection reports or evidence of factory trial bends. If your input falls outside a stated range, do not extrapolate a table to release production. Send the drawing revision, material condition, measured thickness, tooling and the unresolved question for review.
Related pages
Product information
Contact JS Ragos about the equipment and configurations in these documents.
Contact us