Model parameters
The HM series is an electro-hydraulic press brake: the upper beam (ram) carries the punch and moves down onto the lower table. Rated force and bending length are listed per model; use one model row rather than the series name.
Products / Press brakes / HM
The HM electro-hydraulic press brake moves the upper beam down toward the lower table. Select a model by required bending force and worktable length.

Overview
The HM series is an electro-hydraulic press brake: the upper beam (ram) carries the punch and moves down onto the lower table. Rated force and bending length are listed per model; use one model row rather than the series name.
Rated force runs from 80 to 320 ton and bending length from 2500 to 6100 mm. Bed length is listed at 2500, 3200, 4100, 5100 and 6100 mm, so every HM model carries at least a 2500 mm bed, and every model lists two main-motor ratings.
The HM series lists 28 electro-hydraulic press brakes from 80 to 320 ton, with beds from 2500 to 6100 mm. It holds the longest press-brake bed on this site and lists two main-motor ratings on every model; for shorter beds or more than 320 ton, use HG.
Choose a model
View the full specifications and compare models.
Confirm the applicable range by material, size and working conditions.
Selection
Check rated force and bending length on the same model row as your longest bend. Confirm tooling load limits, daylight, throat depth and the loading path for that row; the listed figures do not establish a permitted local tool load.
Speeds are machine motion ratings, not parts per hour. Approach, working and return speeds describe the moving member; bend sequence, sheet handling, tool changes and protection settings also set the real cycle.
Check the installation space against the dimensions of the selected model and the site layout. Confirm the individual dimensions listed here separately rather than adding or converting them. For the dual motor ratings, check the power supply requirements against the selected configuration and keep each rating confirmed on its own.
The published tables carry no supply voltage. Confirm voltage, phase, frequency, supply capacity, foundation and access against the quotation and its installation drawing; machine weight and dimensions support planning, not a foundation approval.
Models
Select any HM model to open its complete parameters, compare models in the series side by side and read the dimension drawing for the selected model.
Select model: HM-80-2500
HM electro-hydraulic press brake
HM electro-hydraulic press brake · Rated bending force (ton) 80 ton · A — Bending length (mm) 2500 mm · E — Daylight opening (mm) 450 mm
AHM-80-2500 · A — Bending length (mm): 2500 mm
The drawing shows the general layout of this series. It is a reference and is not to scale for the selected model.
A — working/bending length of the machine.
A is the working/bending length; L is the machine length. On MG models D identifies the stroke of the moving lower worktable; on NG models D identifies the stroke of the upper beam (ram).
These are our standard specifications. Customized specifications are available upon request.
Matching models: 28 / 28
| Model | Rated bending force (ton) | A — Bending length (mm) | B — Distance between frames (mm) | C — Throat depth (mm) | D — Y-axis stroke (mm) | E — Daylight opening (mm) | Main motor power (kW) | Approach speed (mm/s) | Bending speed (mm/s) | Return speed (mm/s) | Machine length (mm) | Machine width (mm) | Machine height (mm) | Machine weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HM-80-2500 | 80 | 2500 | 2000 mm | 400 mm | 200 mm | 450 mm | 5.5 × 2 kW | 240 mm/s | 10–18 mm/s | 240 mm/s | 2680 + 370 mm | 1950 mm | 2500 mm | 6000 kg |
| HM-110-2500 | 110 | 2500 | 2000 mm | 400 mm | 200 mm | 500 mm | 5.5 × 2 kW | 240 mm/s | 10–15 mm/s | 220 mm/s | 2690 + 380 mm | 1950 mm | 2540 mm | 7200 kg |
| HM-110-3200 | 110 | 3200 | 2700 mm | 400 mm | 200 mm | 500 mm | 5.5 × 2 kW | 240 mm/s | 10–15 mm/s | 220 mm/s | 3390 + 380 mm | 2000 mm | 2540 mm | 8000 kg |
| HM-110-4100 | 110 | 4100 | 3500 mm | 400 mm | 200 mm | 500 mm | 5.5 × 2 kW | 240 mm/s | 10–15 mm/s | 220 mm/s | 4190 + 380 mm | 2000 mm | 2585 mm | 9000 kg |
| HM-130-2500 | 130 | 2500 | 2000 mm | 400 mm | 200 mm | 500 mm | 7.5 × 2 kW | 220 mm/s | 10–15 mm/s | 200 mm/s | 2690 + 380 mm | 2020 mm | 2540 mm | 8000 kg |
| HM-130-3200 | 130 | 3200 | 2700 mm | 400 mm | 200 mm | 500 mm | 7.5 × 2 kW | 220 mm/s | 10–15 mm/s | 200 mm/s | 3390 + 380 mm | 2020 mm | 2540 mm | 9000 kg |
| HM-130-4100 | 130 | 4100 | 3500 mm | 400 mm | 200 mm | 500 mm | 7.5 × 2 kW | 220 mm/s | 10–15 mm/s | 200 mm/s | 4190 + 380 mm | 2020 mm | 2595 mm | 10000 kg |
| HM-130-5100 | 130 | 5100 | 4100 mm | 400 mm | 200 mm | 500 mm | 7.5 × 2 kW | 220 mm/s | 10–15 mm/s | 200 mm/s | 4990 + 380 mm | 2020 mm | 2695 mm | 11500 kg |
| HM-130-6100 | 130 | 6100 | 5000 mm | 400 mm | 200 mm | 500 mm | 7.5 × 2 kW | 220 mm/s | 10–15 mm/s | 200 mm/s | 5890 + 380 mm | 2020 mm | 2745 mm | 15000 kg |
| HM-170-2500 | 170 | 2500 | 2000 mm | 400 mm | 200 mm | 500 mm | 7.5 × 2 kW | 200 mm/s | 10–15 mm/s | 180 mm/s | 2710 + 390 mm | 2030 mm | 2720 mm | 8500 kg |
| HM-170-3200 | 170 | 3200 | 2700 mm | 400 mm | 200 mm | 500 mm | 7.5 × 2 kW | 200 mm/s | 10–15 mm/s | 180 mm/s | 3410 + 390 mm | 2030 mm | 2720 mm | 9800 kg |
| HM-170-4100 | 170 | 4100 | 3500 mm | 400 mm | 200 mm | 500 mm | 7.5 × 2 kW | 200 mm/s | 10–15 mm/s | 180 mm/s | 4210 + 390 mm | 2030 mm | 2720 mm | 12000 kg |
| HM-170-5100 | 170 | 5100 | 4100 mm | 400 mm | 200 mm | 500 mm | 7.5 × 2 kW | 200 mm/s | 10–15 mm/s | 180 mm/s | 5010 + 390 mm | 2030 mm | 2820 mm | 14000 kg |
| HM-170-6100 | 170 | 6100 | 5000 mm | 400 mm | 200 mm | 500 mm | 7.5 × 2 kW | 200 mm/s | 10–15 mm/s | 180 mm/s | 5900 + 390 mm | 2030 mm | 2870 mm | 17000 kg |
| HM-220-2500 | 220 | 2500 | 2000 mm | 400 mm | 200 mm | 500 mm | 7.6 × 2 kW | 180 mm/s | 10–15 mm/s | 160 mm/s | 2710 + 400 mm | 2120 mm | 2780 mm | 9700 kg |
| HM-220-3200 | 220 | 3200 | 2700 mm | 400 mm | 200 mm | 500 mm | 7.6 × 2 kW | 180 mm/s | 10–15 mm/s | 160 mm/s | 3410 + 400 mm | 2120 mm | 2780 mm | 12000 kg |
| HM-220-4100 | 220 | 4100 | 3500 mm | 400 mm | 200 mm | 500 mm | 7.6 × 2 kW | 180 mm/s | 10–15 mm/s | 160 mm/s | 4210 + 400 mm | 2120 mm | 2780 mm | 14500 kg |
| HM-220-5100 | 220 | 5100 | 4100 mm | 400 mm | 200 mm | 500 mm | 7.6 × 2 kW | 180 mm/s | 10–15 mm/s | 160 mm/s | 5010 + 400 mm | 2120 mm | 2880 mm | 17500 kg |
| HM-220-6100 | 220 | 6100 | 5000 mm | 400 mm | 200 mm | 500 mm | 7.6 × 2 kW | 180 mm/s | 10–15 mm/s | 160 mm/s | 5910 + 400 mm | 2120 mm | 2980 mm | 21000 kg |
| HM-250-2500 | 250 | 2500 | 2000 mm | 400 mm | 250 mm | 550 mm | 7.6 × 2 kW | 160 mm/s | 10–15 mm/s | 140 mm/s | 2715 + 595 mm | 2200 mm | 3060 mm | 12000 kg |
| HM-250-3200 | 250 | 3200 | 2700 mm | 400 mm | 250 mm | 550 mm | 7.6 × 2 kW | 160 mm/s | 10–15 mm/s | 140 mm/s | 3415 + 595 mm | 2200 mm | 3060 mm | 15000 kg |
| HM-250-4100 | 250 | 4100 | 3500 mm | 400 mm | 250 mm | 550 mm | 7.6 × 2 kW | 160 mm/s | 10–15 mm/s | 140 mm/s | 4215 + 595 mm | 2200 mm | 3060 mm | 17500 kg |
| HM-250-5100 | 250 | 5100 | 4100 mm | 400 mm | 250 mm | 550 mm | 7.6 × 2 kW | 160 mm/s | 10–15 mm/s | 140 mm/s | 5020 + 390 mm | 2200 mm | 3300 mm | 21000 kg |
| HM-250-6100 | 250 | 6100 | 5000 mm | 400 mm | 250 mm | 550 mm | 7.6 × 2 kW | 160 mm/s | 10–15 mm/s | 140 mm/s | 5980 + 430 mm | 2200 mm | 3400 mm | 26000 kg |
| HM-320-3200 | 320 | 3200 | 2700 mm | 400 mm | 300 mm | 600 mm | 11.5 × 2 kW | 140 mm/s | 10–12 mm/s | 120 mm/s | 3460 + 550 mm | 2400 mm | 3265 mm | 22500 kg |
| HM-320-4100 | 320 | 4100 | 3500 mm | 400 mm | 300 mm | 600 mm | 11.5 × 2 kW | 140 mm/s | 10–12 mm/s | 120 mm/s | 4260 + 550 mm | 2400 mm | 3265 mm | 26000 kg |
| HM-320-5100 | 320 | 5100 | 4100 mm | 400 mm | 300 mm | 600 mm | 11.5 × 2 kW | 140 mm/s | 10–12 mm/s | 120 mm/s | 5060 + 390 mm | 2400 mm | 3500 mm | 30000 kg |
| HM-320-6100 | 320 | 6100 | 5000 mm | 400 mm | 300 mm | 600 mm | 11.5 × 2 kW | 140 mm/s | 10–12 mm/s | 120 mm/s | 5980 + 430 mm | 2400 mm | 3700 mm | 35000 kg |
Choose up to three models of this series. Common known values are listed first.
0 / 3 models selected
Add at least one model to compare.
Check the installation space against the dimensions of the selected model and the site layout. Confirm the individual dimensions in the table separately; do not add or convert them yourself. For the dual motor ratings, check the power supply requirements against the selected configuration and keep each rating confirmed on its own.
Resources
HM lists the longest press-brake bed on this site — 6100 mm, from 130 to 320 ton; no HG model goes beyond 6000 mm. The trade-off is reach at the small end: the HM series has no model below 2500 mm or 80 ton, so short beds and light forces are handled by the HG series.
Between 80 and 320 ton, with beds from 2500 to 6000 mm, both series list models. Compare the model row: HG lists one main motor, HM lists two ratings, and the long-bed steps differ (HG 4000/5000/6000 mm, HM 4100/5100/6100 mm).
Product catalogue
Press brakes, panel benders, V-grooving machines and robotic bending cells: 6 series and 80 models with standard specifications and the configuration choices behind a machine order.
English PDF · 28 pages · 80 models · 6 series · 1.64 MB · November 2026
Contact JS Ragos for machine models, configurations and quotations.
Get a quote