Model parameters
The HG series is an electro-hydraulic press brake: the upper beam (ram) carries the punch and moves down onto the lower table. Rated force and bending length are listed per model; use one model row rather than the series name.
Products / Press brakes / HG
The HG series is an electro-hydraulic press brake: the upper beam carries the punch down to the lower table. Compare models by rated force, bending length and tooling before confirming the configuration.

Overview
The HG series is an electro-hydraulic press brake: the upper beam (ram) carries the punch and moves down onto the lower table. Rated force and bending length are listed per model; use one model row rather than the series name.
Rated force runs from 35 to 400 ton and bending length from 1200 to 6000 mm. Bed length is listed in fixed steps — 1200, 1600, 2000, 2500, 3200, 4000, 5000 and 6000 mm — and the three smallest models (HG-35-1200, HG-50-1600 and HG-60-2000) sit below the 2500 mm floor of the HM series.
The HG series lists 31 electro-hydraulic press brakes from 35 to 400 ton, with beds from 1200 to 6000 mm. It is the only series here above 320 ton and the one that goes below the HM series' 2500 mm floor; compare one model row before tooling and site supply.
Choose a model
View the full specifications and compare models.
Confirm the applicable range by material, size and working conditions.
Selection
Check rated force and bending length on the same model row as your longest bend. Confirm tooling load limits, daylight, throat depth and the loading path for that row; the listed figures do not establish a permitted local tool load.
Speeds are machine motion ratings, not parts per hour. Approach, working and return speeds describe the moving member; bend sequence, sheet handling, tool changes and protection settings also set the real cycle.
Check the installation space against the dimensions of the selected model and the site layout. Confirm the individual dimensions listed here separately rather than adding or converting them.
The published tables carry no supply voltage. Confirm voltage, phase, frequency, supply capacity, foundation and access against the quotation and its installation drawing; machine weight and dimensions support planning, not a foundation approval.
Models
Select any HG model to open its complete parameters, compare models in the series side by side and read the dimension drawing for the selected model.
Select model: HG-35-1200
HG electro-hydraulic press brake
HG electro-hydraulic press brake · Rated bending force (ton) 35 ton · A — Bending length (mm) 1200 mm · E — Daylight opening (mm) 450 mm
AHG-35-1200 · A — Bending length (mm): 1200 mm
The drawing shows the general layout of this series. It is a reference and is not to scale for the selected model.
A — working/bending length of the machine.
A is the working/bending length; L is the machine length. On MG models D identifies the stroke of the moving lower worktable; on NG models D identifies the stroke of the upper beam (ram).
These are our standard specifications. Customized specifications are available upon request.
Matching models: 31 / 31
| Model | Rated bending force (ton) | A — Bending length (mm) | B — Distance between frames (mm) | C — Throat depth (mm) | D — Y-axis stroke (mm) | E — Daylight opening (mm) | Main motor power (kW) | Approach speed (mm/s) | Bending speed (mm/s) | Return speed (mm/s) | Machine length (mm) | Machine width (mm) | Machine height (mm) | Machine weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HG-35-1200 | 35 | 1200 | 1000 mm | 300 mm | 160 mm | 450 mm | 4 kW | 200 mm/s | 10 mm/s | 180 mm/s | 1800 mm | 1255 mm | 2400 mm | 3000 kg |
| HG-50-1600 | 50 | 1600 | 1260 mm | 300 mm | 160 mm | 450 mm | 5.5 kW | 200 mm/s | 10 mm/s | 180 mm/s | 2100 mm | 1355 mm | 2400 mm | 4000 kg |
| HG-60-2000 | 60 | 2000 | 1600 mm | 400 mm | 160 mm | 450 mm | 7.5 kW | 200 mm/s | 10 mm/s | 180 mm/s | 2235 + 415 mm | 1600 mm | 2370 mm | 4600 kg |
| HG-80-2500 | 80 | 2500 | 2000 mm | 400 mm | 160 mm | 450 mm | 7.5 kW | 200 mm/s | 10 mm/s | 180 mm/s | 2680 + 370 mm | 1930 mm | 2500 mm | 5500 kg |
| HG-110-2500 | 110 | 2500 | 2000 mm | 400 mm | 200 mm | 500 mm | 9.7 kW | 200 mm/s | 10 mm/s | 160 mm/s | 2690 + 380 mm | 1930 mm | 2540 mm | 6500 kg |
| HG-110-3200 | 110 | 3200 | 2700 mm | 400 mm | 200 mm | 500 mm | 9.7 kW | 200 mm/s | 10 mm/s | 160 mm/s | 3390 + 380 mm | 1910 mm | 2540 mm | 7200 kg |
| HG-110-4000 | 110 | 4000 | 3500 mm | 400 mm | 200 mm | 500 mm | 10.2 kW | 200 mm/s | 10 mm/s | 160 mm/s | 4190 + 380 mm | 1910 mm | 2585 mm | 8500 kg |
| HG-130-2500 | 130 | 2500 | 2000 mm | 400 mm | 200 mm | 500 mm | 10.2 kW | 200 mm/s | 10 mm/s | 160 mm/s | 2690 + 380 mm | 1920 mm | 2540 mm | 6600 kg |
| HG-130-3200 | 130 | 3200 | 2700 mm | 400 mm | 200 mm | 500 mm | 10.2 kW | 200 mm/s | 10 mm/s | 160 mm/s | 3390 + 380 mm | 1920 mm | 2545 mm | 7300 kg |
| HG-130-4000 | 130 | 4000 | 3500 mm | 400 mm | 200 mm | 500 mm | 10.2 kW | 200 mm/s | 10 mm/s | 160 mm/s | 4190 + 380 mm | 1920 mm | 2595 mm | 8550 kg |
| HG-130-5000 | 130 | 5000 | 4100 mm | 400 mm | 200 mm | 500 mm | 15.2 kW | 200 mm/s | 10 mm/s | 160 mm/s | 4990 + 380 mm | 1920 mm | 2695 mm | 13000 kg |
| HG-170-3200 | 170 | 3200 | 2700 mm | 400 mm | 200 mm | 500 mm | 10.2 kW | 180 mm/s | 10 mm/s | 150 mm/s | 3400 + 390 mm | 1940 mm | 2720 mm | 9000 kg |
| HG-170-4000 | 170 | 4000 | 3300 mm | 400 mm | 200 mm | 500 mm | 15.2 kW | 180 mm/s | 10 mm/s | 150 mm/s | 4200 + 390 mm | 1940 mm | 2720 mm | 10500 kg |
| HG-170-5000 | 170 | 5000 | 4100 mm | 400 mm | 200 mm | 500 mm | 15.2 kW | 180 mm/s | 10 mm/s | 150 mm/s | 5000 + 390 mm | 1940 mm | 2820 mm | 15000 kg |
| HG-170-6000 | 170 | 6000 | 5000 mm | 400 mm | 200 mm | 500 mm | 18.5 kW | 180 mm/s | 10 mm/s | 150 mm/s | 5900 + 390 mm | 1940 mm | 2870 mm | 17000 kg |
| HG-220-3200 | 220 | 3200 | 2700 mm | 400 mm | 200 mm | 500 mm | 15.2 kW | 160 mm/s | 10 mm/s | 140 mm/s | 3410 + 400 mm | 2020 mm | 2785 mm | 10700 kg |
| HG-220-4000 | 220 | 4000 | 3500 mm | 400 mm | 200 mm | 500 mm | 18.5 kW | 160 mm/s | 10 mm/s | 140 mm/s | 4210 + 400 mm | 2030 mm | 2785 mm | 12000 kg |
| HG-220-5000 | 220 | 5000 | 4100 mm | 400 mm | 200 mm | 500 mm | 18.5 kW | 160 mm/s | 10 mm/s | 140 mm/s | 5010 + 400 mm | 2200 mm | 2880 mm | 18000 kg |
| HG-220-6000 | 220 | 6000 | 5000 mm | 400 mm | 200 mm | 500 mm | 22 kW | 160 mm/s | 10 mm/s | 140 mm/s | 5910 + 400 mm | 2250 mm | 3330 mm | 22000 kg |
| HG-250-3200 | 250 | 3200 | 2700 mm | 400 mm | 250 mm | 550 mm | 18.5 kW | 150 mm/s | 9 mm/s | 130 mm/s | 3420 + 435 mm | 2080 mm | 3060 mm | 12500 kg |
| HG-250-4000 | 250 | 4000 | 3500 mm | 400 mm | 250 mm | 550 mm | 18.5 kW | 150 mm/s | 9 mm/s | 130 mm/s | 4220 + 435 mm | 2085 mm | 3060 mm | 14500 kg |
| HG-250-5000 | 250 | 5000 | 4100 mm | 400 mm | 250 mm | 550 mm | 18.5 kW | 150 mm/s | 9 mm/s | 130 mm/s | 5020 + 390 mm | 2200 mm | 3300 mm | 20000 kg |
| HG-250-6000 | 250 | 6000 | 5000 mm | 400 mm | 250 mm | 550 mm | 22 kW | 150 mm/s | 9 mm/s | 130 mm/s | 5980 + 430 mm | 2240 mm | 3400 mm | 26000 kg |
| HG-320-3200 | 320 | 3200 | 2700 mm | 400 mm | 300 mm | 600 mm | 22 kW | 130 mm/s | 9 mm/s | 110 mm/s | 3450 + 405 mm | 2400 mm | 3220 mm | 15700 kg |
| HG-320-4000 | 320 | 4000 | 3500 mm | 400 mm | 300 mm | 600 mm | 22 kW | 130 mm/s | 9 mm/s | 110 mm/s | 4250 + 405 mm | 2400 mm | 3270 mm | 18000 kg |
| HG-320-5000 | 320 | 5000 | 4100 mm | 400 mm | 300 mm | 600 mm | 22 kW | 130 mm/s | 9 mm/s | 110 mm/s | 5060 + 390 mm | 2460 mm | 3610 mm | 23500 kg |
| HG-320-6000 | 320 | 6000 | 5000 mm | 400 mm | 300 mm | 600 mm | 22 kW | 130 mm/s | 9 mm/s | 110 mm/s | 5980 + 430 mm | 2470 mm | 3800 mm | 27500 kg |
| HG-400-3200 | 400 | 3200 | 2700 mm | 450 mm | 300 mm | 600 mm | 30 kW | 110 mm/s | 7 mm/s | 90 mm/s | 3800 mm | 2400 mm | 3500 mm | 21000 kg |
| HG-400-4000 | 400 | 4000 | 3500 mm | 450 mm | 300 mm | 600 mm | 30 kW | 110 mm/s | 7 mm/s | 90 mm/s | 4600 mm | 2400 mm | 3700 mm | 22000 kg |
| HG-400-5000 | 400 | 5000 | 4100 mm | 450 mm | 300 mm | 600 mm | 30 kW | 110 mm/s | 7 mm/s | 90 mm/s | 5600 mm | 2400 mm | 3950 mm | 25900 kg |
| HG-400-6000 | 400 | 6000 | 5000 mm | 450 mm | 300 mm | 600 mm | 30 kW | 110 mm/s | 7 mm/s | 90 mm/s | 6600 mm | 2400 mm | 4200 mm | 31500 kg |
Choose up to three models of this series. Common known values are listed first.
0 / 3 models selected
Add at least one model to compare.
Check the installation space against the dimensions of the selected model and the site layout. Confirm the individual dimensions in the table separately; do not add or convert them yourself.
Resources
HG covers the two ends the HM series does not: beds shorter than 2500 mm, and rated force above 320 ton. It is the only press-brake series on this site rated to 400 ton, and the 400-ton models also list a 450 mm throat, the deepest in either hydraulic series.
Between 80 and 320 ton, with beds from 2500 to 6000 mm, both series list models. In that band compare the model row, not the series name: HG lists one main motor, every HM model lists two main-motor ratings, and the long-bed steps differ (HG 4000/5000/6000 mm, HM 4100/5100/6100 mm).
Product catalogue
Press brakes, panel benders, V-grooving machines and robotic bending cells: 6 series and 80 models with standard specifications and the configuration choices behind a machine order.
English PDF · 28 pages · 80 models · 6 series · 1.64 MB · November 2026
Contact JS Ragos for machine models, configurations and quotations.
Get a quote