Knowledge base

Sheet metal knowledge base

Find the background for your question: material behaviour, process choice, die and punch constraints, or the requirement and check for a finished part.

  • 4Branches
  • Your questionChoose a branch

Which question brought you here?

Start with the question you need to resolve. Compare material behaviour in Materials; follow cutting, forming or joining in Processes; check die and punch choices in Tooling; or connect a drawing requirement or observed defect to a check in Quality. You can enter at any branch.

Your questionStart hereBring these inputs
Which material fits the environment and forming task?Materials: one selection guideGrade, condition, thickness and working environment
Which operation can produce the required shape?Processes: cutting, bending, shearing, rolling and weldingDrawing, shape, material and thickness
Which die or punch fits the bend?Tooling: V-die opening and punch, including multi-V and gooseneck sectionsInside radius, flange geometry and available tool information
What must be checked, or what could explain a defect?Quality: tolerances, inspection and defect atlasDrawing requirement, observed symptom and measurement method

Material or process: what is still undecided?

If the material is still undecided, compare its forming, joining and corrosion behaviour against the working environment. If the grade is already specified and the question concerns making the shape, start with Processes. A familiar material name alone does not establish how a particular grade and condition will behave.

Tooling constraint or a part that needs checking?

For a bend limited by support, radius or clearance, the tooling branch explains die and punch choices. For a part that needs checking, the quality branch separates tolerances, flatness and surface inspection, and defect investigation. Requirements come from the drawing and applicable evidence; a symptom alone does not establish its cause.

Ready to compare equipment?

Once the part and process questions are clear, compare equipment through the selection and acceptance guides or explore machine families in the product overview. Keep process behaviour separate from the requirements used to select and accept a machine.

Carry the question into the next step

  • Name the open question: material, process, tooling or a part requirement. You do not have to read the branches in a fixed order.
  • Compare the options in the relevant branch, then use the individual page for behaviour, failure modes and selection limits.
  • Share the drawing revision, grade and condition, actual thickness, requirements and any existing measurement record between purchasing and the workshop.
  • Confirm grade properties and thickness tolerance against the relevant material documentation and mill certificate rather than a generic table.
  • If you already have an initial calculation, retain its inputs and assumptions. A calculated result does not establish equipment suitability or part acceptance.

Scope and limits

For a production decision, bring the actual material certificate, machine manual and applicable process sheet or standard to the question you are checking. Keep any approximate planning value with its stated assumptions.

Equipment and technical enquiries

Contact JS Ragos about the equipment or technical topics covered here.

Contact us