The idea in one paragraph
US11745241B2 describes a bending machine that changes tooling by the set. A pair of gripping elements engages every tool in the set at once; a transfer carriage brings that set from a storage guide to the gripper; the gripper places the set on the upper or lower crosspiece. The magazine, the carriage and the gripper are three separate mechanisms with one job: stop handling segments one at a time.
That makes this a logistics patent, not an angle-control patent. It addresses how tooling reaches the bending line and how the next set is prepared. Whether the installed set is the right composition, and whether the first part is at angle, still has to be established by the machine and its acceptance test.
The document
- Granted publication
- US11745241B2, 15 claims
- PCT publication
- WO2020075079A1
- Title
- Bending machine for metal sheets with a tools' magazine
- Inventors
- Roberto Meneghello and Giulio Farina
- Assignee on the register
- Salvagnini Italia S.p.A.
- Priority / PCT filing
- 11 October 2018 / 9 October 2019
- US grant publication
- 5 September 2023
Why segmented tooling creates a logistics problem
A segmented punch or die is a row of tool pieces whose widths add up to the working length and leave gaps where the part geometry needs them. Change the panel and the required row can change: not merely its total length, but the width, order and spacing of its segments. The patent's description uses standardized widths in 10 mm increments as an example. The important point is discreteness: a continuous adjustment cannot produce every required row.
Moving one segment at a time repeats the pick, travel, place and return cycle for every piece. The patent attacks that repetition. It also attacks a second interruption: an operator loading an internal magazine may have to stop the machine. Its answer is to bring storage trays out of the internal compartment while the transfer and replacement mechanisms remain inside.
Claim 1 is one handoff built from six elements
| Element | What claim 1 requires | The job it does |
|---|---|---|
| Frame and tool holders | A base plate, an upper crosspiece and a lower crosspiece carrying aligned tool sets | Defines the two destinations for a set |
| Internal magazine | A tool magazine inside the compartment defined by the frame and tool arrangements | Keeps stored tooling within the machine envelope |
| Whole-set gripper | A gripping device that simultaneously hooks and moves a whole set | Deletes the one-segment-at-a-time cycle |
| Storage guides | Parallel guides on the base plate, each slidingly housing a set | Keeps each set ordered and ready to transfer |
| Transfer carriage | A carriage that carries a set across the storage positions | Selects which guide is being loaded or unloaded |
| Two exchange positions | Loading positions at the guides and an exchange position next to the gripper | Separates storage selection from tool-holder replacement |
The geometry matters. The carriage travels along a first direction across the guides; the set moves along the bending direction between a guide and the carriage. Those are two different motions. Calling the whole assembly a robot hides the mechanism: a selector carriage handles storage, and a separate gripper handles installation.
Follow one set through the machine
| Step | Motion |
|---|---|
| 1. Select | The transfer carriage aligns with the guide holding the required set |
| 2. Collect | A moving slide hooks the tool-holding carriage and draws it onto the transfer carriage |
| 3. Present | The transfer carriage moves to the exchange position beside the replacement apparatus |
| 4. Grip | Two gripping elements engage the hooking seats of all tools in the set together |
| 5. Install | The replacement apparatus moves the set to the upper or lower crosspiece and releases it |
| 6. Compose | Positioning devices move sets along the crosspiece to make room for the next set and form the required equipment |
Removal runs the sequence backwards. An empty tool-holding carriage arrives at the exchange position, receives the set being removed, and returns it to an empty storage guide. The mechanism therefore handles both sides of changeover; it does not merely feed new tools into the machine.
What the other claims add
| Claims | Addition | Why it matters |
|---|---|---|
| 2 | Multiple upper and lower sets can be repositioned along their crosspieces | Whole-set exchange and segment composition work together |
| 3–8 | The gripper moves between tool-holder and carriage positions, with paired uprights, arms and two gripping elements | Defines the installation mechanism and the all-seats grip |
| 9–10 | One or two storage trays slide between internal operating and external loading positions | Lets the next tooling be prepared outside the internal compartment |
| 11–15 | Upper and lower tool-holding carriages, a hooking slide and locking elements | Keeps a set intact during storage and transfer |
Claim 8 is the mechanical centre of the whole-set idea: the two gripping elements engage all the hooking seats in the set. Claims 14 and 15 are the quiet counterpart: locking features hold the tool-holding carriage in its guide, and the transfer hook releases that lock when it collects the carriage. Fast handling depends on the set staying ordered until the instant it is meant to move.
The one-metre example is not a rated capacity
The description illustrates three upper sets and three lower sets, with each set forming a tool line of one metre. That is an embodiment used to explain the sequence. Claim 1 does not require three sets, a one-metre set length, a particular magazine capacity or a changeover time. A buyer quoting those example numbers as machine specifications would be converting an illustration into a rating.
The claims are equally silent on tool identification, composition verification, positioning tolerance and first-part angle. Those functions may exist in a complete machine, but they need their own evidence. The patent defines a particular transfer architecture; it does not prove the result of a production changeover.
The acceptance test this architecture deserves
- Time the whole change, not the grip. Start with the last good part of job A and stop at the first verified part of job B. Storage selection, removal, installation, composition and control checks all belong inside that interval.
- Change both upper and lower equipment. Claim 1 allows replacement on either or both; a demonstration of only the easier side does not establish the cycle you will run.
- Use a genuinely different composition. Change segment widths, order and gaps, then verify the installed row against the job definition. A like-for-like set swap demonstrates transport, not setup flexibility.
- Load the external tray during the intended operating state. Have the supplier show the physical separation, locking and safeguarding that make the loading position accessible.
- Test recovery. Stop with a set on the transfer carriage and again with it in the gripper. The useful machine is the one whose recovery sequence preserves tool order and tells the operator how to restart.
For the angle side of that first verified part, read the companion reading of US9778013B2 and workpiece-mounted angle measurement. For the tool motion that creates clearance around a formed flange, see EP2711102B1 and the swiveling blade.
Cite it
- Primary source
- US11745241B2, claims 1–15
- Core combination
- Whole-set gripper + storage guides + selecting transfer carriage + exchange position
- Example, not rating
- Three sets and one metre per set appear in the described embodiment
- Family text
- WO2020075079A1, published 16 April 2020