The claim

Four filings, six years, one direction. Every one of these patents moves the automation closer to the sheet: first the machine gets a way to adjust itself, then the line feeds and changes dies on its own, then the tool itself is given a controlled path, and finally a second process — stamping — is pulled into the same station as the bend. Read in order, they describe where the value in bending automation has been migrating, and what a buyer is actually paying for when the word "automatic" appears on a quotation.

The four filings

YearPublicationSubjectClaims
2017CN207447008UHeight-adjustable device for a CNC bending machine5
2019CN109550818BAutomatic production line for metal plate bending7
2021CN214719561UInclined-plane lifting hinge-knife mechanism for an automatic bending centre8
2023CN220497436UCombined automatic bending and stamping mechanism for a polygonal bending centre8

Only CN109550818B is a granted invention patent (B); the other three are utility models (U). That difference matters when you read scope: a utility model protects a shape or structure, and its independent claim is often narrow — sometimes a single structural feature.

2017: the machine gets a height adjustment

CN207447008U is a device that sits between the CNC bending machine base and the floor. Claim 1 requires a connecting seat bolted to the machine base, a connecting plate below it, a support base, a lifting column with an internal sliding slot, a drive motor in the slot with an output shaft driving a lift support rod, and a lower base carrying a hydraulic cylinder and telescopic rod.

The dependent claims are all about distribution and proportion: four to six connecting seats symmetric about the machine base, four lifting columns at the corners of the base, a lift rod longer than the column, a base area matching the machine base. This is installation engineering, and the claims read like a foundation drawing. It is also where automation starts in practice: a machine that cannot be levelled and set to height cannot be lined up with a feeder.

2019: the line runs itself

CN109550818B is the step change. The machine base carries a conveying arm with feed rollers and pressing mechanisms, a rotating die base with a square groove at one end and a trapezoidal groove at the other, a motor driving that rotation, a bending bracket with two hydraulic cylinders and two matching heads, a limit baffle with a photoelectric sensor, and a PLC cabinet tying the motor, sensor and cylinders together.

The claim is a flow claim. It removes the two manual steps that dominate small-part bending — carrying the blank to the machine and swapping the die — and hands the sequencing to a controller. The full reading, including what the claims leave out, is in the claim-by-claim article on this patent.

2021: the tool learns to move on an incline

CN214719561U is a small, precise idea. Claim 1 covers almost nothing by design: a hinge-knife body, a rear cover plate, and a rectangular movable slot on the right side of that plate, set at an angle. Everything else is dependent. A joint link sits in the slot, a movable hinge knife is fixed to the link, a cylinder drives a connecting rod from the plate, and the assembly runs on two linear rails with a worktable, an upper pressing knife and a quick clamp.

The abstract states the purpose plainly: the inclined slot makes the movable hinge knife rise along a slope so it does not touch or rub the sheet while clamping, and a tool that does not rub does not shift the part. On a bending centre, where the tool does the work that a backgauge and an operator do on a press brake, that is the whole game. A few tenths of drag at the wrong moment becomes a flange that is out of position.

2023: two processes in one station

CN220497436U combines bending and stamping in a polygonal bending centre. Claim 1 puts a workpiece table under an automatic bending unit, and a stamping unit on the far side of the table: a first stamping cylinder mounted outside the table, a wedge block sliding in a through-hole in the lower part of the table, an upper die above the wedge, a spring with a damper above the die, and a punch protrusion passing through a slot in the table.

The mechanical logic is a wedge converting horizontal cylinder motion into vertical punch motion, inside the table the sheet is already sitting on. The value is not the stamping force; it is that the part never leaves the station between the bend and the pierce. Every re-fixture is a chance to lose position, and this claim deletes one.

What the direction means for a buyer

  • Judge a bending centre by its tool, not its frame. The 2021 and 2023 filings are entirely about what happens at the sheet. Two machines with the same frame and the same tonnage can differ completely in what their tools can do.
  • A line is not a centre. The 2019 patent moves parts and selects one of two dies. A true bending centre manipulates the tool around a stationary sheet. If a supplier uses the words interchangeably, ask which mechanism from which filing is actually in the machine.
  • Count the processes, not the axes. Every additional operation pulled into the station removes a handling step and a position error. That is the direction the 2023 claim is buying.
  • Read the claim type. A utility model's narrow claim is not a weakness in the machine; it is a precise description of the one thing that made the design work. Ask the supplier to point at that feature in the machine.

The machine families these mechanisms belong to are on the robotic bending cell and panel bender pages. The sequence of decisions around them is in the bending automation guide.

Cite the sources

All four documents are public. Cite the publication number and the claim numbers; the tables and descriptions above are our paraphrase of the published claims.

2017
CN207447008U, claims 1–5
2019
CN109550818B, claims 1–7
2021
CN214719561U, claims 1–8
2023
CN220497436U, claims 1–8