Grooving before bending

NVA CNC V-Grooving Machine

Our NVA CNC V-grooving machine cuts V-shaped grooves along the bend line before forming. The series covers processing lengths from 1600 to 6200 mm for visible sheet metal parts.

Product rangeNVA

5 Models · 1600–6200 mm

Browse models

Overview

The NVA series at a glance

The RAGOS NVA v grooving machine cuts a groove along the bend line of a flat sheet before folding. Its published coverage is 1600–6200 mm processing length, 10–1600 mm processing width and 0.5–6 mm sheet thickness, which spans cabinet panels as well as long elevator and cladding blanks. Those figures describe the series, so the groove lines and clamping of a complete part are checked against the drawing.

Read more

Grooving removes material along the intended bend line and can reduce the bending force and corner radius of the following bend; the sheet is still bent afterwards on a press brake or folder. Because the remaining section carries the corner, we match it to the drawing and to the way the part is used. A continuous outer face after bending is a visual result, not a strength or mark-free guarantee.

Equipment overview

Our NVA CNC V grooving machine cuts a V-shaped groove along the bend line before folding. The series covers 0.5–6 mm sheet thickness, 1600–6200 mm processing length and 10–1600 mm processing width.

Choose a model

Product range NVA

5 Models

View the full specifications and compare models.

Confirm the applicable range by material, size and working conditions.

Selection

How to choose a V-grooving machine

V-grooving machines are built in horizontal and vertical arrangements, and the useful comparison is how each one supports and clamps the full sheet, reaches the required groove lines and handles turning or re-clamping. This page does not state the working orientation of the NVA series, and it should not be inferred from the photograph; the arrangement is described in the proposal for the quoted model.

Read more
  • The comparison starts from the largest sheet and the actual thicknesses, including the common job and the most demanding part.
  • Groove positions, intersections, edge references and the proposed remaining section show whether the clamps can reach them.
  • Loading, sheet support, turning, re-clamping and unloading are compared for the actual workpiece and the handling equipment in the plant.
  • The appearance face, final radius and angle, drawing requirements and final use are assessed together on the grooved and bent part.
  • The cutting route, tooling and quoted configuration describe the output; the number of knives alone does not.

The related bending-process guide explains the force, radius and springback behind these points.

Technology

The groove and the remaining section

The groove is defined by the material grade and condition, the actual sheet thickness, the groove profile and depth, and the remaining thickness beneath it. The 0.5–6 mm figure is sheet thickness, not a permissible groove depth. We do not publish a universal minimum remaining thickness: the groove and the following bend are agreed against the drawing and the intended use, with design approval where the part carries load.

Read more

We record the appearance face and any protective film on the drawing, because clamps and supports contact the sheet. Surface marks, final angle, radius and cracking are judged on a grooved-and-bent sample from the same material.

Job conditionWhat the quotation definesHow it is confirmed
Material and remaining sectionGrade, condition, actual thickness, groove profile and remaining thicknessSuitability for bending and final use; no strength gain is inferred from grooving
Appearance faceVisible face, finish, protective film and permitted marksContact surfaces, clamping and the appearance after bending
Groove layoutAll groove lines, edge references, intersections and required bend geometryReachability, clamping clearance and any re-positioning
Subsequent bendingTooling, bend sequence, final angle/radius and use of the partA grooved-and-bent sample compared with the drawing

Tooling on a V-cut machine

On the NVA the tooling and the cutting route carry the groove lines: cutting direction, return and retract movements, the number of passes and any turning or re-clamping of the sheet. The tool material, its heat treatment and the supplied tooling list are quoted with the model, so the proposal describes the route and not only the number of knives.

Read more
  • Published processing size: 1600–6200 mm long and 10–1600 mm wide, with the sheet and groove layout checked against those figures.
  • Published sheet range: 0.5–6 mm, with tooling and groove conditions selected for the material.
  • Processing speed is listed as to be confirmed; it is not a cycle-time commitment.

Applications

Typical applications

Most NVA work is visible sheet: V grooving for stainless steel, V grooving for elevator panels and V grooving for electrical cabinets, together with the parts below. The application name describes where the machine is used; it does not approve a grade, a surface result or a load-bearing use on its own.

  • Stainless steel appliance panels
  • Elevator doors and decorative cladding
  • Kitchen equipment and counter fronts
  • Architectural and display sheet
  • Aluminum panels with folded edges

Models

NVA series specifications

The table below lists the published NVA models and their processing range. Grooving thickness, processing length and groove depth belong to the part drawing: the series covers the sheet range, while the groove depth, remaining section and cutting route follow the part.

Select model: NVA-1600

01 / 05models in this seriesNVA series

CNC V-grooving machine

NVA-1600

CNC V-grooving machine · Processing length 1600 mm · Processing width 10–1600 mm · Sheet thickness range 0.5–6 mm

Discuss this model
Processing length
1600mm
Processing width
10–1600mm
Sheet thickness range
0.5–6mm
Minimum edge distance
8 mm
Machine length (mm)
2610 mm
Machine width (mm)
2500 mm
Machine height (mm)
2100 mm
Machine weight (kg)
4700 kg
X-axis cutting speed
Confirmation required

These are our standard specifications. Customized specifications are available upon request.

Workpiece capacity

Processing length
1600 mm
Processing width
10–1600 mm
Sheet thickness range
0.5–6 mm
Minimum edge distance
8 mm

Dimensions

Machine length (mm)
2610 mm
Machine width (mm)
2500 mm
Machine height (mm)
2100 mm
Machine weight (kg)
4700 kg

Speeds

X-axis cutting speed
Confirmation required
X-axis return speed
Confirmation required
Y-axis feed speed
Confirmation required
Z-axis vertical speed
Confirmation required

Axes and positioning

Y-axis minimum resolution
±0.01 mm
Y-axis maximum travel
1250 mm
Z-axis minimum resolution
±0.01 mm
Z-axis maximum travel
15 mm

Power

Hydraulic clamping system
3 kW / 8 L / 10 MPa
Machine electrical capacity
10.18 kVA
Total power (kW)
9.1 kW

Matching models: 5 / 5

All models — complete table
ModelProcessing lengthProcessing widthSheet thickness rangeMinimum edge distanceX-axis cutting speedX-axis return speedY-axis feed speedZ-axis vertical speedY-axis minimum resolutionY-axis maximum travelZ-axis minimum resolutionZ-axis maximum travelHydraulic clamping systemMachine electrical capacityTotal power (kW)Machine length (mm)Machine width (mm)Machine height (mm)Machine weight (kg)
NVA-16001600 mm10–1600 mm0.5–6 mm8 mmConfirmation requiredConfirmation requiredConfirmation requiredConfirmation required±0.01 mm1250 mm±0.01 mm15 mm3 kW / 8 L / 10 MPa10.18 kVA9.1 kW2610 mm2500 mm2100 mm4700 kg
NVA-32003200 mm10–1600 mm0.5–6 mm8 mmConfirmation requiredConfirmation requiredConfirmation requiredConfirmation required±0.01 mm1250 mm±0.01 mm30 mm2.2 kW / 8 L / 10 MPa13.75 kVA11 kW4630 mm3000 mm2100 mm9000 kg
NVA-42004200 mm10–1600 mm0.5–6 mm8 mmConfirmation requiredConfirmation requiredConfirmation requiredConfirmation required±0.01 mm1250 mm±0.01 mm30 mm2.2 kW / 8 L / 10 MPa13.75 kVA11 kW5630 mm3000 mm2100 mm11000 kg
NVA-52005200 mm10–1600 mm0.5–6 mm8 mmConfirmation requiredConfirmation requiredConfirmation requiredConfirmation required±0.01 mm1250 mm±0.01 mm30 mm2.2 kW / 8 L / 10 MPa13.75 kVA11 kW6380 mm3000 mm2100 mm13000 kg
NVA-62006200 mm10–1600 mm0.5–6 mm8 mmConfirmation requiredConfirmation requiredConfirmation requiredConfirmation required±0.01 mm1250 mm±0.01 mm30 mm2.2 kW / 8 L / 10 MPa13.75 kVA11 kW7430 mm3000 mm2100 mm16100 kg

All parameters

NVA-1600

Workpiece capacity

Processing length
1600 mm
Processing width
10–1600 mm
Sheet thickness range
0.5–6 mm
Minimum edge distance
8 mm

Dimensions

Machine length (mm)
2610 mm
Machine width (mm)
2500 mm
Machine height (mm)
2100 mm
Machine weight (kg)
4700 kg

Speeds

X-axis cutting speed
Confirmation required
X-axis return speed
Confirmation required
Y-axis feed speed
Confirmation required
Z-axis vertical speed
Confirmation required

Axes and positioning

Y-axis minimum resolution
±0.01 mm
Y-axis maximum travel
1250 mm
Z-axis minimum resolution
±0.01 mm
Z-axis maximum travel
15 mm

Power

Hydraulic clamping system
3 kW / 8 L / 10 MPa
Machine electrical capacity
10.18 kVA
Total power (kW)
9.1 kW

NVA-3200

Workpiece capacity

Processing length
3200 mm
Processing width
10–1600 mm
Sheet thickness range
0.5–6 mm
Minimum edge distance
8 mm

Dimensions

Machine length (mm)
4630 mm
Machine width (mm)
3000 mm
Machine height (mm)
2100 mm
Machine weight (kg)
9000 kg

Speeds

X-axis cutting speed
Confirmation required
X-axis return speed
Confirmation required
Y-axis feed speed
Confirmation required
Z-axis vertical speed
Confirmation required

Axes and positioning

Y-axis minimum resolution
±0.01 mm
Y-axis maximum travel
1250 mm
Z-axis minimum resolution
±0.01 mm
Z-axis maximum travel
30 mm

Power

Hydraulic clamping system
2.2 kW / 8 L / 10 MPa
Machine electrical capacity
13.75 kVA
Total power (kW)
11 kW

NVA-4200

Workpiece capacity

Processing length
4200 mm
Processing width
10–1600 mm
Sheet thickness range
0.5–6 mm
Minimum edge distance
8 mm

Dimensions

Machine length (mm)
5630 mm
Machine width (mm)
3000 mm
Machine height (mm)
2100 mm
Machine weight (kg)
11000 kg

Speeds

X-axis cutting speed
Confirmation required
X-axis return speed
Confirmation required
Y-axis feed speed
Confirmation required
Z-axis vertical speed
Confirmation required

Axes and positioning

Y-axis minimum resolution
±0.01 mm
Y-axis maximum travel
1250 mm
Z-axis minimum resolution
±0.01 mm
Z-axis maximum travel
30 mm

Power

Hydraulic clamping system
2.2 kW / 8 L / 10 MPa
Machine electrical capacity
13.75 kVA
Total power (kW)
11 kW

NVA-5200

Workpiece capacity

Processing length
5200 mm
Processing width
10–1600 mm
Sheet thickness range
0.5–6 mm
Minimum edge distance
8 mm

Dimensions

Machine length (mm)
6380 mm
Machine width (mm)
3000 mm
Machine height (mm)
2100 mm
Machine weight (kg)
13000 kg

Speeds

X-axis cutting speed
Confirmation required
X-axis return speed
Confirmation required
Y-axis feed speed
Confirmation required
Z-axis vertical speed
Confirmation required

Axes and positioning

Y-axis minimum resolution
±0.01 mm
Y-axis maximum travel
1250 mm
Z-axis minimum resolution
±0.01 mm
Z-axis maximum travel
30 mm

Power

Hydraulic clamping system
2.2 kW / 8 L / 10 MPa
Machine electrical capacity
13.75 kVA
Total power (kW)
11 kW

NVA-6200

Workpiece capacity

Processing length
6200 mm
Processing width
10–1600 mm
Sheet thickness range
0.5–6 mm
Minimum edge distance
8 mm

Dimensions

Machine length (mm)
7430 mm
Machine width (mm)
3000 mm
Machine height (mm)
2100 mm
Machine weight (kg)
16100 kg

Speeds

X-axis cutting speed
Confirmation required
X-axis return speed
Confirmation required
Y-axis feed speed
Confirmation required
Z-axis vertical speed
Confirmation required

Axes and positioning

Y-axis minimum resolution
±0.01 mm
Y-axis maximum travel
1250 mm
Z-axis minimum resolution
±0.01 mm
Z-axis maximum travel
30 mm

Power

Hydraulic clamping system
2.2 kW / 8 L / 10 MPa
Machine electrical capacity
13.75 kVA
Total power (kW)
11 kW

Compare models

Choose up to three models of this series. Common known values are listed first.

0 / 3 models selected

Add at least one model to compare.

Contact us about this series without selecting a model

Resources

Equipment configuration

The NVA configuration covers the tooling set, the clamping and support arrangement and the cutting route. The sample inspection method and the delivery scope are agreed in the specific proposal, so the quotation lists what is supplied with the machine.

What the precision figures measure

Read more
CheckRecord from the quotationWhat it decides
Declared precisionMeasured quantity, axis, travel, load and test methodThe Y- and Z-axis minimum resolutions are listed as ±0.01 mm; this is an axis resolution, not a groove-position or groove-depth tolerance for the finished part.
Groove and edge referenceDepth, remaining thickness and position at named locations; clamp and edge referencesThe listed 8 mm minimum margin has no stated reference datum. The actual groove or clamping reference is confirmed in the quotation; it is not a tear-out, residual-thickness or strength limit.
Formed sampleFinal angle, radius, surface and assembly fit after bendingA recorded grooved-and-bent sample is compared with the drawing; the parameter table is not a trial result.

Common questions

Why use a V groover before bending?

Grooving removes material at the bend line and can reduce the force and corner radius in a subsequent bend. The remaining section, surface and final geometry are confirmed on the specified material; grooving does not guarantee a mark-free corner or increased strength.

How thick a sheet can the machine groove?

The product table lists a sheet thickness range of 0.5–6 mm. That is not a groove-depth range or an approval of every grade within it, so the material, tool set, groove and remaining section are confirmed together.

How accurate is the groove position?

The source table lists ±0.01 mm as the Y- and Z-axis minimum resolution, which defines the measured quantity: an axis resolution. It is not a groove-position or groove-depth tolerance for the finished part, and the separate 8 mm minimum-margin entry still needs its reference datum confirmed.

How long do the grooving tools last?

Tool life depends on material, actual thickness, groove depth and cutting conditions. The quotation states the supplied tool specification, the wear checks and any spare tooling; no tool-life figure is established here.

Can the machine groove stainless steel?

Stainless steel and aluminum are listed application materials. The specific grade and condition, tool set, groove and remaining section are confirmed for the drawing; the application name does not approve every material or surface finish.

Does grooving replace a press brake?

No. Grooving prepares the bend line, and a press brake or folder still performs the bend. The remaining section, tooling, bend sequence and final geometry are checked for the intended use.

What affects the price of a sheet metal grooving machine?

Price depends on the processing length, width, tool set, control and clamping configuration. With the material, thickness, groove layout and finished part, the quotation can define the machine and the supplied tooling.

Documents, sources and next steps

Product catalogue

RAGOS product catalogue (English PDF)

Press brakes, panel benders, V-grooving machines and robotic bending cells: 6 series and 80 models with standard specifications and the configuration choices behind a machine order.

English PDF · 28 pages · 80 models · 6 series · 1.64 MB · November 2026

Download the English PDF (1.64 MB)

Equipment and quotations

Contact JS Ragos for the NVA model, tooling and quotation; the proposal states the machine configuration and the supplied tooling.

Get a quote

Inquiry form

Tell us which equipment you need or what you would like to know. You can include a model if you have one in mind.

This form does not autosave unsent drafts. Keep this tab open while checking the source or privacy notice.

Contact details (optional)
Machine, process and drawing details (optional)

PDF, DWG, DXF, STEP, JPG or PNG, up to 10 MB.

We use these details only to respond to your inquiry. Privacy policy (opens in a new tab)