[{"data":1,"prerenderedAt":274},["ShallowReactive",2],{"page-content:en:standards\u002Fiso-9013":3},{"meta":4,"hero":10,"body":30,"faq":223,"references":236,"related":264,"cta":269},{"path":5,"title":6,"seoTitle":7,"description":8,"updated":9},"\u002Fstandards\u002Fiso-9013\u002F","ISO 9013:2017 + ISO 9013:2017\u002FAmd 1:2024","ISO 9013 Cut Quality: Guide & Worksheet | JS Ragos","How to read ISO 9013 in practice: skew and roughness as quantities, published scope ranges, a worked 6 mm example worksheet, and what a photo cannot prove.","2026-11-07",{"kicker":11,"title":12,"subtitle":13,"actions":14,"facts":23},"Standard interpretation","ISO 9013 cut-edge quality: requirements and inspection","A cut plate can have a sloping face, a rough surface or dross along its lower edge. Understand each feature, specify what the part needs and compare recorded measurements with the agreed requirements.",[15,19],{"label":16,"href":17,"kind":18},"Open the cut-quality worksheet","#iso-cut-worksheet","primary",{"label":20,"href":21,"kind":22},"Standards index","\u002Fstandards\u002F","secondary",[24,27],{"value":25,"label":26},"2017-02","Base edition published",{"value":28,"label":29},"2024-09","Amendment published",[31,34,38,40,46,53,56,58,60,65,73,76,78,81,83,85,88,90,111,116,118,121,123,137,139,142,148,150,184,186,189,204,206,209,211,215,219],{"type":32,"text":33},"p","Look at a freshly cut plate. Its outline may look correct while its cut face slopes through the thickness. The face may look smooth while solidified metal remains attached underneath. These are different issues. ISO 9013 provides a framework for specifying the geometrical quality of thermal cuts; a useful order identifies the required features, and inspection checks each one.",{"type":35,"text":36,"id":37},"h2","Begin with the edge you can see","section-2",{"type":32,"text":39},"First distinguish the top of the plate, the cut face through its thickness and the lower edge. The next operation helps identify what matters: mating parts need the specified geometry and dimensions; an exposed face needs an agreed surface requirement; welding or coating may call for separately specified edge preparation.",{"type":41,"items":42},"ul",[43,44,45],"The cut face: how far it departs from the intended direction through the plate.","The surface of that face: how tall and how regular the profile irregularities are.","The lower edge: whether re-solidified material stayed attached after the cut.",{"type":47,"src":48,"alt":49,"width":50,"height":51,"caption":52},"img","\u002Fimages\u002Fiso-9013-face.svg","Concept sketch of two cut faces against a 90 degree target direction: part A is close to the target, part B is clearly skewed; a blue dashed line marks the target direction and a red line marks the actual cut face. Not to scale.",480,340,"Square-edge concept, not to scale: blue dashed lines mark the 90° target and red lines the face. A is close to the target; B leans away. This does not specify a measurement method or quality range.",{"type":35,"text":54,"id":55},"Two different questions: how straight the cut is and how smooth it is","section-4",{"type":32,"text":57},"Face deviation asks how far the face departs from its designed direction. Roughness describes small-scale height variations on that face. Sketch A is close to the square-edge target; B leans away from it. A deliberately designed weld bevel has an inclined target, so it must be assessed against that target rather than automatically against 90°.",{"type":32,"text":59},"In the next sketch, 1 marks the face texture and 2 marks dross attached to the lower edge; B enlarges the surface profile. Agree the required condition of that lower edge with the next operation. Warping of the plate is a separate flatness issue, addressed through the applicable material and drawing requirements.",{"type":47,"src":61,"alt":62,"width":50,"height":63,"caption":64},"\u002Fimages\u002Fiso-9013-texture.svg","Concept sketch in two parts: part A shows a cut face with fine profile waviness and material attached at the lower edge, part B enlarges the surface profile variation. Not to scale.",360,"Concept, not to scale: 1 marks the texture on face A; 2 marks lower-edge dross. B enlarges the surface profile. The sketch does not depict the readings in the worked example.",{"type":41,"items":66},[67],[68],{"key":69,"href":70,"role":71,"label":72},"laser-machine-safety","\u002Fstandards\u002Fgb-t-18490-1-2017\u002F","supplement","GB\u002FT 18490.1-2017 - laser processing machine safety",{"type":35,"id":74,"text":75},"section-8","What can a photograph tell you?",{"type":32,"text":77},"A photograph helps both parties identify the same edge and mark visible dross or inclination. Viewing angle, lighting and scale affect an ordinary photograph, so it does not replace u or Rz5 measurements made by the specified method. Link the photograph number to the measurement record.",{"type":35,"text":79,"id":80},"What do u and Rz5 measure?","quality-features",{"type":32,"text":82},"u is the perpendicularity or angularity tolerance characteristic, expressed in mm, for the cut face relative to its specified direction. It is not an angle in degrees or simply the slope seen in a photograph. Rz5 is a profile-height parameter in µm describing surface roughness. Use the evaluation appropriate to that parameter rather than substituting an Ra reading. Confirm the sampling region, instruments and evaluation method against the applicable text and inspection plan.",{"type":32,"text":84},"A quality range concerns a particular characteristic and must be read with the thickness and applicable conditions. If a supplier quotes a range or class, establish whether it concerns u, Rz5 or dimensional tolerances. A single part can have different requirements for these features; a lower roughness reading cannot offset excessive deviation in another characteristic.",{"type":35,"text":86,"id":87},"Worked example: a straight laser cut in 6 mm-thick steel plate","section-6",{"type":32,"text":89},"This is a teaching scenario: all requirements and readings are invented for explanation, not ISO range limits, recommended tolerances or factory measurements. Assume drawing CQ-DEMO-01 revision A, 6 mm steel and straight-edge laser cutting. The parties have confirmed applicable methods, positions and conditions and agreed u≤0.30 mm and Rz5≤60 µm. Two inspection records, A and B, are then available.",{"type":91,"head":92,"rows":98},"table",[93,94,95,96,97],"Item","Assumption used for this example","Record A","Record B","What the comparison shows",[99,105],[100,101,102,103,104],"Geometrical deviation u","u not greater than 0.30 mm","u = 0.24 mm","u = 0.36 mm","B exceeds the limit by 0.06 mm; A is within it",[106,107,108,109,110],"Roughness Rz5, agreed example limit","Rz5 not greater than 60 µm","Rz5 = 52 µm","Rz5 = 48 µm","Both readings are below the example limit",{"type":41,"items":112},[113,114,115],"Read the u row first: A gives 0.24≤0.30. For B, 0.36−0.30=0.06 mm, so this characteristic exceeds the example requirement.","Then read the Rz5 row: both 52 and 48 are below 60 µm. B has the lower roughness reading, but that does not cancel its excessive u value.","A completes only these two example comparisons. Dimensions, dross removal and other order requirements still need their own checks. Confirm missing requirements; obtain missing measurements.",{"type":32,"text":117},"An order record can follow this structure: “CQ-DEMO-01 \u002F revision A; 6 mm steel; straight-edge laser cutting; standard edition and amendment: [confirm]; u and Rz5 requirements: [the example values]; inspection plan and locations: [confirmed document]; dimensions and edge preparation: [separate requirements].” Complete the bracketed fields before using a record for an actual order.",{"type":35,"text":119,"id":120},"What the published summary of the scope covers","scope",{"type":32,"text":122},"The ISO public abstract states the following thickness ranges. These describe the standard’s scope, not the capacity of a particular machine. It separately requires agreement when applying the document exceptionally to other cutting processes, and directs flatness matters to the relevant material standards.",{"type":91,"head":124,"rows":127},[125,126],"Cutting process in the published summary","Thickness range stated there",[128,131,134],[129,130],"Oxyfuel cutting","3 mm to 300 mm",[132,133],"Plasma cutting","0.5 mm to 150 mm",[135,136],"Laser cutting","0.5 mm to 32 mm",{"type":32,"text":138},"For example, 40 mm laser cutting falls outside the laser thickness range listed here. Review the applicable technical specification, requirements and validation basis instead of assuming that quoting the standard establishes applicability. A supplier’s maximum cutting thickness is also not evidence of cut quality.",{"type":35,"text":140,"id":141},"From agreed requirements to an inspection decision","inspection-steps",{"type":41,"items":143},[144,145,146,147],"Before ordering: identify mating, welded or exposed edges and agree the drawing revision, characteristics, requirements and standard edition.","Before measuring: the inspector checks specimen identity, actual thickness, evaluation region, support and surface condition against the agreed plan, using instruments suitable for the characteristic and requirement. Do not remove an anomaly by grinding and then describe the result as the original cut.","When recording: connect each value with its feature, unit, location and method. Use photographs to identify locations and visible defects while recording geometry and roughness separately.","For an excessive reading: first check units, method and the record. Once confirmed, agree remeasurement, rework or another disposition. Keep a separate record of measurements after rework so the original evidence remains available.",{"type":32,"text":149},"A requirement nobody recorded cannot be inspected. Write the order information once and keep it with the measurements, so a later question about conditions can be answered without guesswork. The worksheet further down this page produces exactly this list as plain text, with blank fields marked \"to confirm\".",{"type":91,"head":151,"rows":155},[152,153,154],"Item to record","How to record it","Who confirms it",[156,160,164,168,172,175,178,181],[157,158,159],"Part or drawing number, with revision","Copy the number and the revision you actually work to","Buyer and supplier",[161,162,163],"Material grade, ordered and actual thickness","Keep the ordered specification and record the measured thickness with its unit","Buyer specifies; supplier\u002Finspector records actual values",[165,166,167],"Process, machine and setup","Cutting process, and the machine and setup actually used","Supplier",[169,170,171],"Standard edition and amendment","Identify the base edition, amendment inclusion and applicable inspection plan","Both sides",[173,174,171],"Agreed requirement and unit","The limit and its unit, for example millimetres for skew or micrometres for roughness",[176,177,171],"Method, instrument and position","How the reading is taken and where on the part",[179,180,171],"Measurement conditions","Environment, part support and instrument state at the time of reading",[182,183,167],"Reading with unit, or open item","The measured value with its unit, or \"to confirm\" and the responsible person",{"type":32,"text":185},"Each record ends the same way: a value with a unit, or an explicit open item. A missing value is information too, as long as it is written down as missing.",{"type":35,"text":187,"id":188},"Edition, publication dates and official access","section-10",{"type":190,"items":191},"key",[192,194,197,200,202],{"label":193,"value":6},"Number",{"label":195,"value":196},"Name","Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances",{"label":198,"value":199},"Status","Current",{"label":26,"value":201},"February 2017",{"label":29,"value":203},"September 2024",{"type":32,"text":205},"The reference \"ISO 9013:2017 + ISO 9013:2017\u002FAmd 1:2024\" means the 2017 base document plus its separate 2024 amendment. They are published as two entries, so both must be consulted, and an order should say explicitly whether the amendment is included. Ask the issuing body or an authorised distributor for the controlled text; the tables of classes, limits and methods belong there, not on this page.",{"type":35,"id":207,"text":208},"section-14","Where can you verify and obtain the documents?",{"type":32,"text":210},"The ISO links below identify the 2017 base edition and the 2024 amendment and lead to official acquisition information. The Kjellberg and Hypertherm pages explain cut-face features and measurement context; their product performance claims do not establish a result for this order.",{"type":212,"id":213,"text":214},"h3","section-12","Reference check record",{"type":190,"items":216},[217],{"label":218,"value":9},"Status checked",{"type":190,"items":220},[221],{"label":222,"value":9},"ISO metadata checked",[224,227,230,233],{"q":225,"a":226},"Does a drawing that says only \"ISO 9013\" state a requirement?","It identifies a reference but usually does not uniquely specify acceptance requirements for the part. Check whether other drawing notes, purchasing specifications and inspection plans already define the characteristics, ranges or limits, conditions and methods; agree any missing items.",{"q":228,"a":229},"Can a photo of the cut edge replace a measurement?","No. A photo is useful for showing where a problem sits and for agreeing what you are looking at, but it carries no values. Skew and roughness are quantities compared against agreed limits, so they need a reading taken under agreed conditions.",{"q":231,"a":232},"If the surface looks smooth, is the part conforming?","Not necessarily. Surface roughness and shape deviation are separate properties, so a visually smooth face can still be skewed, and a square face can carry heavy attached material at the lower edge. Compare each agreed property against its own limit.",{"q":234,"a":235},"Does this page replace the standard for buying or inspecting a machine?","No. Cut-edge quality, part dimensions and machine safety are separate subjects. This page only helps you phrase a cut-quality requirement and record what you measured; the machine safety topic is handled by its own documents.",{"title":237,"items":238},"Sources and further reading",[239,244,249,254,259],{"id":240,"title":241,"url":242,"note":243},"official-standard-metadata","ISO 9013 - official metadata","https:\u002F\u002Fwww.iso.org\u002Fstandard\u002F60321.html","Official record for the base edition; metadata only, not a test report.",{"id":245,"title":246,"url":247,"note":248},"official-amendment","ISO 9013:2017\u002FAmd 1:2024","https:\u002F\u002Fwww.iso.org\u002Fstandard\u002F87851.html","The separate amendment, published as its own entry.",{"id":250,"title":251,"url":252,"note":253},"vendor-process-terminology","Hypertherm - public cutting process knowledge","https:\u002F\u002Fwww.hypertherm.com\u002Fresources\u002Fmore-resources\u002Fblogs\u002Finvest-in-cut-quality\u002F","Public engineering background on cut-edge features and geometrical\u002Fsurface measurement.",{"id":255,"title":256,"url":257,"note":258},"vendor-cutting-technology","Kjellberg - public cutting technology pages","https:\u002F\u002Fwww.kjellberg.de\u002Fquality-parameters.html","Explains face deviation, roughness and additional lower-edge characteristics.",{"id":260,"title":261,"url":262,"note":263},"manufacturing-terminology","autogena: thermal-cut quality terminology","https:\u002F\u002Fautogena.de\u002Fleistungen\u002Fbrennschneiden\u002F","Terminology for u, Rz5 and dimensional tolerances; tables and images are not reproduced here.",[265,268],{"label":266,"path":267},"Laser cutting process","\u002Fknowledge\u002Fprocesses\u002Flaser-cutting\u002F",{"label":20,"path":21},{"heading":270,"headingId":271,"text":272,"button":273},"Equipment standards","cta-heading","Contact JS Ragos to discuss equipment standards and quotation details.","Contact us",1794847189535]