[{"data":1,"prerenderedAt":242},["ShallowReactive",2],{"page-content:en:standards\u002Fgb-t-33644-2025":3},{"meta":4,"hero":10,"body":30,"faq":199,"references":212,"related":233,"cta":238},{"path":5,"title":6,"seoTitle":7,"description":8,"updated":9},"\u002Fstandards\u002Fgb-t-33644-2025\u002F","GB\u002FT 33644-2025","GB\u002FT 33644-2025 Press Brake Accuracy: How to Read It | JS Ragos","Prepare press brake accuracy acceptance with a worked angle example, test conditions, a document checklist and an editable exportable worksheet.","2026-11-07",{"kicker":11,"title":12,"subtitle":13,"actions":14,"facts":23},"Standard interpretation","GB\u002FT 33644: checking press brake accuracy","The bend angles are close to one another, yet all sit above the drawing target. Use a worked example to separate machine inspection, part requirements and trial conditions, then prepare an acceptance worksheet.",[15,19],{"label":16,"href":17,"kind":18},"Open the bending-accuracy worksheet","#standard-readiness-worksheet","primary",{"label":20,"href":21,"kind":22},"Standards index","\u002Fstandards\u002F","secondary",[24,27],{"value":25,"label":26},"Current","Status",{"value":28,"label":29},"2026-05-01","Effective date",[31,34,38,40,46,49,51,59,62,64,71,73,102,108,130,133,135,140,142,145,147,153,155,158,175,177,180,182,184,188,190,195],{"type":32,"text":33},"p","GB\u002FT 33644-2025 provides a basis for checking CNC press brake accuracy. Before acceptance, identify the applicable standard test items and any additional production-part requirements agreed in the contract, with conditions, methods and records for each.",{"type":35,"text":36,"id":37},"h2","Split \"high bending accuracy\" into three things","section-2",{"type":32,"text":39},"Separate the acceptance basis from the specimen used. Machine inspection follows applicable standard items, conditions and methods; the contract may also require a trial using a production part. To use a trial as evidence for a standard item, first confirm that the test item applies and that the specimen, measurement points and test conditions meet its requirements. Retain material batch, thickness, tooling and program details when interpreting the trial.",{"type":41,"items":42},"ul",[43,44,45],"Machine inspection answers \"is the machine itself accurate on these items\"; the items and test conditions come from the standard text.","A test bend answers \"what angle did this plate reach in this setup\"; the reading already contains material, tooling and springback effects.","Process conditions answer \"which variables must be fixed for stable production\"; write them into the drawing, process sheet or acceptance agreement.",{"type":35,"text":47,"id":48},"Safety, technical conditions and part tolerances are agreed separately","section-4",{"type":32,"text":50},"Safety, technical conditions and part tolerances solve different problems and cannot stand in for one another: equipment safety has its own basis, part tolerances come from the drawing and contract, and machine accuracy relates to accuracy inspection results. When all three go into one order, label which document each reference points to.",{"type":41,"items":52},[53],[54],{"key":55,"href":56,"role":57,"label":58},"press-brake-safety","\u002Fstandards\u002Fgb-17120-2025\u002F","supplement","GB 17120-2025 machine safety specification (equipment safety basis)",{"type":35,"text":60,"id":61},"Positioning accuracy, repeatability and part angle are not the same thing","section-8",{"type":32,"text":63},"Positioning accuracy concerns the difference between commanded and achieved position; repeatability concerns the closeness of repeated results under the same conditions. Results can cluster away from the target. Part angles also depend on material and tooling, so arbitrary part readings cannot establish conformity to a machine test item without checking its applicable method and conditions.",{"type":65,"src":66,"alt":67,"width":68,"height":69,"caption":70},"img","\u002Fimages\u002Fstandard-bending-check.svg","Original concept sketch, not to scale, not a standard test setup. Upper part A sketches the motion and positioning of a bending machine; lower part B lists three test-bend readings as text labels, 90.8, 90.9 and 90.8 degrees, with grey text 90 degrees as the drawing target angle. Angles are text labels, not plotted to scale.",480,320,"A: machine motion and positioning. B: three labelled trial readings cluster above the grey 90° target. Original sketch, not to scale; angles are text labels, not a standard test setup.",{"type":32,"text":72},"Here is an invented contract assumption that makes the differences concrete. Assume the part drawing angle is 90 degrees plus or minus 0.5 degrees, so the conforming band is 89.5 to 90.5 degrees. On one machine, with one tooling set and one material batch, three consecutive test bends give 90.8, 90.9 and 90.8 degrees. These tolerance values and readings are an assumed contract condition used to explain the reading; they are not standard limits and not factory measurements. Assume both parties have confirmed the measuring positions, instrument suitability and a decision rule that compares these readings directly with the stated interval.",{"type":74,"head":75,"rows":81},"table",[76,77,78,79,80],"Reading","Assumed conforming band","Measured angle","Comparison with the band","What this step shows",[82,88,93,97],[83,84,85,86,87],"First test bend","89.5-90.5 degrees","90.8 degrees","90.8 - 90.5 = 0.3 degrees above the upper limit","A single reading already exceeds the assumed contract band",[89,84,90,91,92],"Second test bend","90.9 degrees","90.9 - 90.5 = 0.4 degrees above the upper limit","The highest of the three, and the largest excess",[94,84,85,95,96],"Third test bend","0.3 degrees above the upper limit","Close to the first within this three-reading sample",[98,99,100,99,101],"Spread of the three","-","0.1 degrees (90.9 - 90.8)","The results are tightly clustered, but the cluster sits high",{"type":41,"items":103},[104,105,106,107],"Read the band first: 89.5 to 90.5 degrees is the assumed contract requirement from the previous step, and readings must fall inside it.","Then compare one by one: 90.8, 90.9 and 90.8 degrees are all above 90.5, so all three exceed the assumed band, with a maximum excess of 0.4 degrees.","Finally look at spread: the range is only 0.1 degrees, so the three readings sit close together. This describes the closeness of these three readings; their cluster still lies above the target.","These three readings describe one setup on one machine and do not amount to a complete repeatability trial. The standard decides which machine inspection items exist, and this example does not establish the complete test conditions for any standard item.",{"type":74,"head":109,"rows":113},[110,111,112],"Object in the discussion","Question it answers","What the record must state",[114,118,122,126],[115,116,117],"Machine accuracy inspection","Whether the machine meets the requirements on those inspection items","Item name, test conditions, measured values, report reference, machine serial number",[119,120,121],"Test-bend result","What angle this plate reached in this setup","Material grade and batch, thickness, tooling, program, angle readings and instruments",[123,124,125],"Process conditions","Which variables must be fixed for stable production","Springback compensation, tooling and program, material batch, environmental conditions and key operating precautions",[127,128,129],"Safety requirements","What the safety basis for this equipment is","Applicable documents and editions, and how guards and interlocks are confirmed",{"type":35,"text":131,"id":132},"Preparing one bending-accuracy discussion","section-6",{"type":32,"text":134},"Once the objects are separated, a discussion can follow the order below, leaving a traceable record at each step.",{"type":41,"items":136},[137,138,139],"Write the full designation GB\u002FT 33644-2025 with its year into the agreed inspection basis; fix the machine model and configuration before discussing individual items.","Map each accuracy claim in the quotation to a specific inspection item and test condition, and ask for measured values and original reports tied to the model and serial number.","Record the test-bend result separately, stating material, thickness, tooling, program and instruments, so trial figures are not mixed into the same table as machine inspection figures.",{"type":32,"text":141},"If a test-bend angle falls outside the drawing tolerance, first decide whether a machine inspection item is unmet or the process conditions were unsuitable for that trial. A part angle outside tolerance alone does not establish failure of a machine test item. Check both records, then decide whether to adjust the process, remeasure or address an equipment issue.",{"type":35,"text":143,"id":144},"Recording the discussion with the worksheet","worksheet-use",{"type":32,"text":146},"Use the worksheet on this page in this order: fill in the machine model and configuration, then the basis document and scenario (for example \"press brake accuracy discussion \u002F test-bend record\"), then work through the page topics recording the requirement source, conditions and method, evidence or reading, and any open item with its owner.",{"type":41,"items":148},[149,150,151,152],"Requirement source: which document, which edition, which item.","Conditions and method: the test or test-bend conditions, instruments and measurement positions.","Evidence or reading: the measured value with its unit, or \"to confirm\" with the responsible person.","You can add or remove check items on the page, copy the content for an email, or download it as plain text. Everything stays on the current page, nothing is stored or sent automatically, so export before you leave.",{"type":32,"text":154},"The worksheet only keeps the discussion complete; it does not pass judgement and does not produce an automatic conclusion about whether the equipment conforms. Items and limits come from the applicable standard text and the agreed contract.",{"type":35,"text":156,"id":157},"Edition and status","section-10",{"type":159,"items":160},"key",[161,163,166,167,170,172],{"label":162,"value":6},"Number",{"label":164,"value":165},"Name","NC press brake—Testing of the accuracy",{"label":26,"value":25},{"label":168,"value":169},"Published","2025-10-31",{"label":171,"value":28},"Effective",{"label":173,"value":174},"Replaces","GB\u002FT 33644-2017",{"type":32,"text":176},"A current recommended national standard, published 2025-10-31 and effective 2026-05-01, wholly replacing GB\u002FT 33644-2017. The replacement record identifies the edition; technical changes require comparing both texts.",{"type":35,"text":178,"id":179},"Official records and obtaining the text","section-14",{"type":32,"text":181},"The official detail page offers preview and download controls, and actual access depends on their availability.",{"type":32,"text":183},"Confirm the edition through the official links below and obtain the full text from the issuing body or an authorised channel. Items, methods and limits should be based on the applicable standard text.",{"type":185,"text":186,"id":187},"h3","Reference check record","section-12",{"type":32,"text":189},"Before citing it in a new order, return to the issuing body's latest record to confirm the status.",{"type":159,"items":191},[192],{"label":193,"value":194},"Initial registration check","2026-11-02",{"type":159,"items":196},[197],{"label":198,"value":9},"Status checked",[200,203,206,209],{"q":201,"a":202},"A quotation says \"high bending accuracy\". Can I treat that as machine accuracy?","Ask for the test item, edition, conditions and units behind the claim. For a test-bend result, check whether the specimen, points and method correspond to the agreed item. A bare ± value does not define an acceptance requirement.",{"q":204,"a":205},"The three readings 90.8, 90.9 and 90.8 degrees sit close together. Does that mean the machine is fine?","Clustering only means those three readings are near each other, with a range of 0.1 degrees. All three are above the assumed upper limit of 90.5 degrees, and the largest exceeds it by 0.4 degrees. Stable and on-target are different things; a stable offset still exceeds the target. To discuss the machine itself, look at inspection records obtained per the standard's items and methods.",{"q":207,"a":208},"A part angle is out of tolerance - does that mean the machine fails?","Not necessarily. Part angle is also affected by material springback, thickness variation and tooling condition. Check the machine inspection record and the test-bend record separately: if the machine items meet requirements per the standard's methods while the test bend is out, discuss the process conditions first. Each side needs its own record; one number cannot settle it.",{"q":210,"a":211},"Does the worksheet on this page give a conformity result?","No. It groups requirement sources, conditions and methods, evidence or readings, and open items with owners, so both sides can check them together. Conformity is judged against the applicable standard text and the contract; the tool performs no automatic classification.",{"title":213,"items":214},"Official records and technical references",[215,220,224,228],{"id":216,"title":217,"url":218,"note":219},"official-standard-metadata","Publication batch notice","https:\u002F\u002Fopenstd.samr.gov.cn\u002Fbzgk\u002Fstd\u002Fnd?no=2561","Metadata only, not evidence of equipment conformity.",{"id":221,"title":222,"url":223,"note":219},"official-edition-details","Edition details and official access point","https:\u002F\u002Fopenstd.samr.gov.cn\u002Fbzgk\u002Fstd\u002FnewGbInfo?hcno=53DF848F8082CA074FB7181FA3AE677E",{"id":225,"title":226,"url":227,"note":219},"official-replacement-record","Recommended-standard and replacement record","https:\u002F\u002Fstd.samr.gov.cn\u002Fgb\u002Fsearch\u002FgbDetailed?id=42BA7D06A2AEE936E06397BE0A0ACDC9",{"id":229,"title":230,"url":231,"note":232},"bending-process-background","TRUMPF - public notes on air bending and material springback","https:\u002F\u002Fwww.trumpf.com\u002Fen_US\u002Fsolutions\u002Fapplications\u002Fbending\u002F","Public engineering background used only to explain springback and bending process conditions; not a source for any limit, item or inspection method on this page.",[234,237],{"label":235,"path":236},"Press brake models","\u002Fpress-brake\u002F",{"label":20,"path":21},{"heading":239,"text":240,"button":241},"Equipment standards","Contact JS Ragos to discuss equipment standards and quotation details.","Contact us",1794847189535]